The Fanvil i16V Video Intercom is a SIP video door communication unit for gate access, office entrances, warehouse doors, service points, and outdoor calling locations. This page keeps the model name exact for project buyers, PABX installers, ELV contractors, facility teams, and procurement departments working with existing site records or new documentation that specifically names the i16V.

Vector Digital Systems LLC supports Fanvil project enquiries from Dubai with model confirmation, staging, provisioning, and installation across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. For i16V enquiries, the usual requirement is not a single-desk retail purchase. It is a project record, a gate intercom check, a support request, or a site quantity that needs the same model name carried correctly through the quotation.

What the Fanvil i16V is

The Fanvil i16V is a SIP Video Intercom built for door access and visitor communication. It combines a SIP calling endpoint, built-in camera, hands-free speakerphone, PoE network connection, and access-control interfaces in one outdoor intercom unit.

In a Dubai office or warehouse, the i16V can be placed at an entrance, gate, service door, or loading bay. A visitor presses the call button, the intercom places a SIP call to the assigned extension or ring group, and reception or security answers from the PABX side. Depending on the system design, the person answering can speak to the visitor, view video on a compatible endpoint, and release the door or gate through the configured access-control path.

The project value is simple: the entrance becomes part of the SIP communication system instead of sitting as a separate analogue door unit. That suits offices in Business Bay, JLT, DMCC, Sharjah industrial areas, JAFZA warehouses, DIP facilities, villa gates, and multi-site UAE branches where the gate call has to reach the right person without adding another standalone communication system.

2 SIP lines — what that means on a door intercom

The i16V has 2 SIP lines. On a door intercom, that does not mean two Etisalat or du telephone lines, and it does not mean the site should expect two independent visitors to hold two full gate conversations at the same time. SIP lines are registered SIP accounts and call-handling appearances inside the device.

In a practical installation, one SIP account may call reception during working hours. Another route may be used for a security desk, control room, or after-hours destination through the PABX. The actual behaviour depends on the PABX platform, dial plan, ring group, DTMF setting, door-release circuit, and whether the site wants video at the answering point.

This is why line count should not be read like trunk capacity. The i16V is not an office desk phone. It is a SIP endpoint at the entrance. The right project questions are: Which extension should ring? Should it call a group or one phone? Who can release the door? Should the call move to security after hours? Is video required at reception? Is the lock release controlled by the intercom, an access controller, or the gate panel?

Where the i16V fits in UAE projects

The i16V fits projects that need a SIP-based video intercom at a controlled entrance. That may be a reception door in a Dubai office, a villa gate in Jumeirah or Mirdif, a staff entrance in Sharjah, a warehouse shutter-side pedestrian door in JAFZA, or a service gate in DIP where security needs to speak to delivery drivers before opening.

For ELV contractors, the attraction is the clean project pattern: one network cable to the entrance point, PoE from the switch where available, SIP registration on the PABX, and relay wiring for the lock or gate controller. The intercom becomes another managed endpoint on the network instead of a separate door-phone island.

For facility teams, the i16V name matters when checking existing documents. Many sites have handover files, maintenance schedules, and procurement approvals that must match the installed device. Keeping the model name exact avoids confusion during service calls, spare planning, export enquiries, and multi-branch asset checks.

Video, audio, and access-control functions

The i16V includes a built-in camera for video intercom use. In a supported setup, reception or security can see the visitor before opening the gate or door. This is useful for offices where the entrance is not visible from the front desk, warehouses where the guard room is away from the loading area, and villa gates where the user wants a SIP call with visual confirmation.

Audio is handled as hands-free intercom calling. The visitor speaks from the gate panel, while the answering user speaks from the assigned phone or endpoint. HD voice support helps the call sound clearer than a basic buzzer panel, especially when the network, PABX settings, and endpoint codec selection are configured properly.

For door control, the i16V supports input and output interfaces used in access projects. These can be planned around door status, exit button, alarm input, electric lock, or gate controller requirements depending on the site wiring. The final design should always be checked against the access-control cabinet and the electrician’s termination plan.

Outdoor placement still needs care. IP65 and IK10 ratings support exterior use, but the site should still protect the cable entry, avoid poor sealing, prevent exposed loops, and place the unit with sensible shade where possible. Dubai heat, dust, and cleaning water find weak installation work faster than any datasheet suggests.

What to send before we quote

For an i16V enquiry, the fastest route is to send the model name, quantity, project location, PABX platform, and a photo of the entrance point. For an existing site, include the installed panel photo and any old quotation or BOQ line. For a new project, include the gate count, lock type, required call destination, and whether video must be visible at reception.

For support jobs, we may ask for the current extension number, IP range, switch type, PoE status, gate controller photo, and whether the intercom call currently reaches reception, security, or both. For multi-site projects, send the quantity by location so we can plan staging and dispatch in one engagement.

Vector Digital Systems has supplied and supported telephony projects from Dubai since 2009. The i16V page is kept practical: exact model name, project use, staging route, and UAE support path. No guessing from a photo. No changing the model name in your file. Send the requirement and we confirm the correct next step.

Power and network truth for the i16V

The Fanvil i16V uses a 10/100 Mbps Ethernet port. That is normal for a SIP video intercom because the unit sits at an entrance and does not need to pass a workstation connection behind it. Unlike a desk phone, there is no PC passthrough saving to calculate. The important project questions are the cable route, PoE switch availability, outdoor cable protection, and whether the PABX can reach the intercom cleanly across the site network.

Power is supported through PoE or DC12V/1A. For most Dubai office, warehouse, and villa gate projects, PoE is the cleaner method. One Cat6 cable from the comms room carries network and power to the entrance panel. That reduces exposed local power work at the gate and makes testing easier during handover.

For outdoor UAE sites, the installation work decides long-term reliability. IP65 and IK10 are useful ratings, but cable entry, sealing, shade, wall alignment, and correct gland work still matter. A gate intercom at a Jumeirah villa, a JAFZA loading entrance, or a Business Bay service door should not be treated like an indoor wall phone.

Platform compatibility in Dubai projects

The i16V registers as a SIP endpoint on a compatible PABX or SIP server. In UAE projects, that commonly means 3CX, Grandstream UCM, Yeastar, Asterisk, or another SIP-based platform already handling office extensions. The intercom can call a reception extension, guard-room phone, ring group, or control-room endpoint depending on how the dial plan is built.

Etisalat and du SIP trunks normally connect at the PABX side. The i16V is usually an internal endpoint on the LAN. That keeps the gate call controlled by the office call plan: working-hours routing, after-hours routing, ring groups, call recording policy where used, and door-release permissions.

During staging, Vector Digital Systems prepares the SIP account, checks the network settings, assigns the call target, reviews DTMF or relay release behaviour, and performs test calls where the customer provides PABX access details. For project quantities, this saves the installer from programming every entrance panel at the gate under heat and handover pressure.

Exact-model comparison for Fanvil intercom records

This comparison is for project records, not for changing the requested model name. Many UAE sites have several Fanvil intercom references across quotations, asset lists, and maintenance files. Use the exact model printed on the installed device, BOQ, or approved procurement document.

For wider Fanvil planning, keep intercom records separate from desk-phone decisions. Desk phones belong in the Fanvil range comparison. Door panels belong in the project’s access-control and PABX design notes because the lock wiring, call path, and answering endpoint decide the job.

Pricing, support, and supply from Dubai

We do not publish fixed AED pricing for the Fanvil i16V. Project pricing depends on quantity, supply path, installation scope, staging requirement, delivery location, and whether the enquiry is for new supply, site support, or procurement record matching. Send the quantity and location on WhatsApp and we respond with a same-day AED quote where the requirement is clear.

For UAE projects, the quote can include VAT breakdown, delivery, installation, PABX registration, gate-release testing, and handover notes. For contractors, we can quote by entrance label, branch, or phase so the model name matches the approved project paperwork.

Frequently asked questions

What is the exact model name for this product?

The exact model name is Fanvil i16V Video Intercom. Use this name when the BOQ, quotation, asset register, site photo, or procurement file specifically requires i16V.

Will the Fanvil i16V work with our 3CX / Grandstream UCM / Yeastar?

Yes, where the platform accepts standard SIP endpoints. The i16V registers as a SIP video intercom and can call an extension, ring group, reception phone, or guard-room endpoint. We check the PABX details before advising the call route.

Does the Fanvil i16V come with a power adapter, or do I need PoE?

The i16V supports PoE and DC12V/1A power. Do not assume the DC adapter is included in every supply request. We check your switch and site power method, then quote the required PSU or PoE arrangement in the same offer.

What does 2 SIP lines actually mean — can the i16V handle 2 gate calls at once?

The 2 SIP lines are account and call-handling capacity, not a promise of two separate visitor conversations. A normal door-station setup uses one main call path and may use another route for backup, security, or after-hours behaviour through the PABX.

Fanvil i16V vs i10V — what is the difference for a site record?

Use the exact model printed on the installed device, quotation, or BOQ. This page is for Fanvil i16V Video Intercom records. If the label says i10V, treat it as a different Fanvil intercom record and do not merge the names in procurement paperwork.

Can the Fanvil i16V open a gate or electric lock?

Yes, when it is wired correctly into the access-control circuit. The i16V supports input and output interfaces used for door status, exit buttons, lock release, gate controllers, or alarm inputs depending on the site design.

Does Vector Digital Systems configure the i16V before delivery or site work?

Yes, where the PABX and network details are available. We prepare the SIP account, check network settings, assign the call destination, review door-release behaviour, and test the call path before dispatch or during site attendance.

Is VoIP legal in the UAE and will the i16V work with Etisalat or du?

Business VoIP over licensed operators is standard in the UAE under TRA regulation. The i16V is normally an internal SIP endpoint on your PABX, while Etisalat or du SIP trunks connect at the PABX side for outside calling.

Is the Fanvil i16V covered under Fanvil warranty in the UAE?

Warranty depends on stock source, supply date, product condition, and quotation terms. If Vector Digital Systems supplies the unit, the warranty position is stated clearly on the quotation. For installed units at existing sites, we check the service requirement first.

Who is the supplier of Fanvil i16V in Dubai?

Vector Digital Systems LLC is an authorised Fanvil supplier in Dubai, UAE, operating since 2009. We support Fanvil i16V enquiries for project documentation, model confirmation, staging, provisioning, and installation across all seven emirates.

What is the best Fanvil video intercom page to use for an i16V project in Dubai?

Use this Fanvil i16V page when the requirement is exact model identification for a BOQ, tender file, asset register, site photo, or installed entrance point. It keeps the procurement record clean and avoids changing the model name in the project file.

Does Vector Digital Systems export Fanvil i16V from Dubai?

Yes, where availability and documentation allow. We handle Fanvil export enquiries from Dubai for telecom resellers, PABX installers, and system integrators in Saudi Arabia, Oman, Qatar, Kuwait, Kenya, Tanzania, Uganda, Nigeria, Ghana, and Pakistan. FOB Dubai pricing with commercial invoice, packing list, and certificate of origin.

UAE coverage for Fanvil i16V projects

Vector Digital Systems supports Fanvil i16V enquiries across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. We also handle free-zone and project sites in DMCC, JLT, Business Bay, DIP, JAFZA, Dubai Internet City, and Dubai South where access-control schedules, PABX plans, and procurement files name the i16V. One enquiry can cover model confirmation, PABX registration checks, door-release testing, staged supply, and installation support.

MEA export from Dubai

Vector Digital Systems prepares FOB Dubai quotations for Fanvil i16V enquiries where supply and documentation can be confirmed. Export documents can include commercial invoice, packing list, and certificate of origin. We support telecom resellers, PABX installers, ELV contractors, and system integrators across the Gulf, East Africa, West Africa, and South Asia, with destination and quantity checked before quotation.