Description
APC SRTG6KXLI Online UPS 4U Rack/Tower External Battery Dubai
When the rack can’t drop, even for a second
The server is working. The firewall is working. The storage box is working. Then DEWA power flickers for half a second and the whole rack starts rebooting.
That’s when the UPS stops being a small line item on the quote and becomes the part of the rack everyone remembers.
A Dubai office server room usually doesn’t fail because someone bought the wrong server. It fails because the power path was treated as an accessory. Too small a UPS. Wrong outlet type. No network card. No bypass planning. No external battery room for later. A 6kVA load sitting on a UPS that was never meant to carry it through voltage dips, generator transfer, brownouts, or weekend AC shutdowns.
The APC SRTG6KXLI is built for that rack. Not a desktop backup unit. Not a power strip with a battery inside. It is a 6kVA / 6kW Smart-UPS On-Line system for server racks, network rooms, storage arrays, PBX systems, CCTV/NVR racks, and edge IT rooms where the protected equipment needs clean 230V power all the time.
What the APC SRTG6KXLI is built for
The SRTG6KXLI sits in the APC Smart-UPS On-Line range. That matters. Online UPS means the connected load is powered through the inverter continuously. The output stays controlled even when the input is dirty, low, high, unstable, or transferring through a generator event. For IT racks, that is the safer design than line-interactive UPS systems used for smaller office equipment.
This model is sized for racks where the load is already beyond small-office UPS territory. A typical requirement might be two rack servers, one shared storage appliance, a firewall pair, core switch, NVR, IP PBX, and a few PoE/network devices. Or one heavier virtualisation host with storage and network gear in the same cabinet.
It’s also a good fit for branch IT rooms in JAFZA, DAFZA, Al Quoz warehouses, hotel back-office racks, clinics, schools, and trading offices where the IT room is not a full data centre but still carries the business. Etisalat or du connectivity can be stable. The rack still needs protection from voltage events, breaker trips, loose neutral issues, generator transfer delay, and poor electrical segregation inside older buildings.
The important number is not only 6000VA. It is 6000W. Many UPS buyers still compare VA ratings and miss the watt rating. This model has a unity power factor rating, so the useful protected load is the full 6kW. That gives procurement a cleaner way to match the UPS to the actual IT load in watts.
Planning note for UAE server rooms
Don’t size this UPS from the server nameplate alone. Measure or calculate the real rack load in watts, then add growth headroom. A Dell PowerEdge server, storage unit, firewall, switch, NVR, and PBX can look small as individual devices. Together, they decide the UPS size, runtime, heat, outlet plan, and battery expansion requirement.
APC SRTG6KXLI specifications
| Specification | Detail |
|---|---|
| Product Type | APC Smart-UPS On-Line UPS |
| Model | SRTG6KXLI |
| Capacity | 6000VA / 6000W |
| UPS Topology | Double-conversion online |
| Input Voltage | 230V AC 1-phase, 220V / 240V supported |
| Output Voltage | 230V AC 1-phase, configurable 220V / 230V / 240V |
| Output Waveform | Sine wave |
| Output Connections | 2 × IEC C13, 1 × IEC C19, hard-wire 3-wire output |
| Input Connection | Hard-wire 3-wire, 1P + N + E |
| Maximum Input Current | 30A |
| Bypass | Internal bypass, automatic and manual |
| Battery Type | Lead-acid internal battery |
| Replacement Battery | APCRBC170 |
| External Battery Pack | Supports SRTG192XLBP4 battery packs |
| Network Management | Preinstalled Network Management Card 3 with environmental monitoring |
| Form Factor | Rack / tower convertible, 4U |
| Dimensions | 175mm H × 440mm W × 620mm D |
| Weight | 55.9kg |
| Operating Temperature | 0°C to 40°C |
| Acoustic Level | 55dBA |
| Heat Dissipation | 1330.74 BTU/h |
Why double-conversion online UPS matters
A line-interactive UPS waits for input power to move outside range, then transfers to battery or correction mode. That can be fine for desktops and light office equipment. It is not always the right choice for server racks carrying virtual machines, storage writes, database activity, firewall sessions, NVR recording, and IP telephony.
The SRTG6KXLI uses double-conversion online design. Incoming AC is converted and conditioned, then the UPS delivers a controlled sine-wave output to the load. The connected IT equipment sees stable power from the UPS inverter, not whatever the building supply is doing at that moment.
That helps in Dubai buildings where the issue is not only complete outage. It can be voltage sag when lifts start. Generator transfer delay. Overloaded distribution boards in older offices. Weekend maintenance where someone shuts down the wrong circuit. AC restarts after a trip. Short disturbances that don’t look serious until the storage array logs write errors or the firewall reboots during business hours.
230V rack planning
The SRTG6KXLI is a 230V single-phase UPS with 2 × IEC C13, 1 × IEC C19, and hard-wire output. Before ordering, check the connected equipment plug types, rack PDU type, load in watts, DB breaker rating, cable route, and whether the final output should feed a rack PDU or a dedicated protected circuit.
Network management and remote monitoring
The built-in Network Management Card 3 is one of the reasons this model makes sense for business racks. Without network management, the UPS sits in the rack and beeps when something is wrong. With NMC3, IT can monitor status over the network, review events, check battery condition, set alerts, and shut down connected systems in a controlled way when runtime is running out.
That matters for companies without a full-time engineer sitting next to the rack. A warehouse office in JAFZA, a clinic in Deira, a school in Sharjah, or a branch in Abu Dhabi may only have remote IT support. When the UPS logs an overload, battery fault, input issue, or temperature warning, the IT team needs to know before the rack goes dark.
Environmental monitoring is also useful in UAE deployments. UPS battery life is heavily affected by heat. A rack kept in a closed storeroom with poor AC can age batteries faster than expected. NMC3 monitoring gives the support team a way to see what is happening around the UPS instead of guessing after the failure.
Vector Digital Systems configures UPS management during installation where required: IP settings, access credentials, alert routing, shutdown policy, and basic handover. Many UPS units are installed and left unmanaged. That is a waste of the hardware. For a 6kVA UPS protecting production equipment, monitoring should be part of the job.
Installation warning
This is a 30A-class hard-wire UPS, not a plug-and-play desktop unit. Electrical input, output wiring, breaker selection, rack placement, and load testing should be handled by qualified technicians. Plan the DB side before delivery, especially for office server rooms and shared building electrical rooms.
Battery and runtime planning
Runtime depends on the connected load. A 1kW rack and a 5kW rack are both within the rating, but they do not get the same backup time. This is why a proper UPS quote should ask for load in watts and expected runtime, not just “6kVA price”.
The SRTG6KXLI uses internal lead-acid batteries and supports APCRBC170 replacement battery cartridges. For longer runtime, it can be paired with SRTG192XLBP4 external battery packs. That gives the buyer a cleaner growth path: start with the UPS, then extend runtime later when the rack load or shutdown policy changes.
For some Dubai customers, the target is only safe shutdown. Five to fifteen minutes may be enough if servers need time to stop cleanly. For others, the UPS must bridge generator start-up or short utility failures. That may require external battery packs. The correct answer depends on the load, not the model name.
When you send us the enquiry, include the equipment list: servers, storage, firewall, switches, NVR, PBX, and any rack PDU details. We’ll size the UPS, runtime, outlet plan, and battery expansion properly instead of guessing from VA alone.
Power, cooling, and rack placement
The SRTG6KXLI is a 4U UPS and weighs 55.9kg. That weight matters. In a 42U cabinet, the UPS should sit low in the rack, not above servers and switches. Better balance. Safer service access. Less stress when battery replacement is due later.
For Dubai server rooms, cooling is part of the UPS decision. The unit’s heat dissipation is 1330.74 BTU/h, and the operating range is 0°C to 40°C. That does not mean you should run the room near 40°C. Lead-acid batteries age faster in heat. A UPS installed in a closed store room, above false ceiling heat, or beside a poorly ventilated rack can lose battery life early.
This is common in offices where the rack is placed in an admin room, pantry corner, warehouse office, or shared electrical space. The servers are fine until the AC is switched off after working hours. The UPS then sits in trapped heat all night. After one Dubai summer, runtime drops. After two, the battery alarm starts.
Vector Digital Systems checks the load, rack position, input wiring, air path, and protected output plan during installation. For server racks in Business Bay, JAFZA, DAFZA, Al Quoz, DIP, Sharjah industrial areas, and Abu Dhabi offices, this saves the same problem from repeating: good UPS, poor room, early battery failure.
Rack placement tip
Install the 4U UPS low in the rack, confirm rail kit requirements before delivery, and leave space for battery service. If the rack also carries Dell PowerEdge servers, storage, firewall, and switches, plan the UPS position before cable dressing is completed.
Grey market UPS warning
UPS hardware looks simple from outside. Same model number. Same black chassis. Same front panel. But the supply channel still matters.
A grey market UPS may be imported from a different region, stored badly, supplied with old batteries, missing accessories, wrong warranty path, or no clear support route in UAE. With servers, the risk is service tag and warranty. With UPS systems, the risk is battery age, support coverage, firmware, accessory mismatch, and whether the unit was stored in proper conditions before sale.
Battery condition is the hidden issue. A UPS can look new and still have batteries that have been sitting too long in a hot warehouse. The unit powers on. The display looks normal. Then the first outage comes and runtime is nowhere near expected.
Buy from a source that can support the full power path: UPS supply, battery packs, replacement battery APCRBC170, rail kit planning, electrical coordination, network card setup, shutdown policy, and AMC. A cheap UPS with no installation support is not cheap when it drops a production rack.
Check before purchase
Confirm the exact model SRTG6KXLI, battery condition, UAE warranty path, rail kit requirement, external battery pack compatibility, and installation scope. Also confirm whether the quote includes electrical work, rack mounting, network management configuration, and load testing.
What Vector Digital Systems provides with the SRTG6KXLI
Vector Digital Systems supplies APC UPS systems for UAE server rooms, office IT racks, network rooms, CCTV racks, PBX rooms, and edge deployments. We don’t treat the UPS as a box delivery. Power protection needs sizing, installation, testing, and support.
For the SRTG6KXLI, we can support the full job: UPS supply, rack or tower placement, protected output planning, rack PDU matching, external battery pack planning, network management setup, alert configuration, shutdown policy coordination, and battery replacement planning.
Installation is available across all 7 UAE emirates: Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. For Dubai offices, we regularly deal with small server rooms where Etisalat or du routers, firewalls, switches, NVRs, and one or two rack servers all sit in the same cabinet. That is exactly where the SRTG6KXLI needs proper load sizing.
For larger sites, we can coordinate with your electrician or facilities team. The UPS uses hard-wire input, so the DB side must be ready. Breaker rating, cable route, earthing, protected output, bypass requirement, and rack location should not be left for delivery day.
AMC support is also available. Batteries need periodic checks. Event logs need review. Runtime should be tested. Dust and heat need attention. In Dubai, a UPS that is not checked for two summers can become a surprise during the first real power cut.
Useful with Dell PowerEdge racks
The SRTG6KXLI is often paired with server racks running Dell PowerEdge hosts, shared storage, firewall, switching, and backup equipment. For Dell server projects, see our Dell PowerEdge server range in Dubai and plan UPS sizing at the same time as server, storage, and rack PDU selection.
Stock and availability in Dubai
Stock & Availability: APC SRTG6KXLI available in Dubai on request. Same-day quote on WhatsApp. UPS-only, UPS with installation, UPS with battery pack, and UPS with AMC options available. Project quantities and FOB Dubai pricing available for resellers, Africa, GCC, and South Asia.
Pricing is quoted on WhatsApp because the final number depends on scope. UPS only is one quote. UPS with rail kit, electrical installation, rack PDU, external battery pack, monitoring setup, and AMC is another. We quote the exact requirement instead of showing a fixed AED price that doesn’t match the final job.
Send the rack load in watts, equipment list, required backup time, location, and whether electrical work is needed. We’ll respond with a clear configuration and availability.
Frequently asked questions — APC SRTG6KXLI Dubai
Is the APC SRTG6KXLI a 6kVA or 6kW UPS?
It is both: 6000VA and 6000W. That unity power factor rating matters because the usable load is the full 6kW. Still, we recommend sizing below maximum load so the UPS has headroom for startup draw, future devices, and safe runtime.
Can I plug the SRTG6KXLI into a normal wall socket?
No. This is a hard-wire UPS with 1P + N + E input and a maximum input current of 30A. It needs proper electrical installation, correct breaker planning, and qualified technician work. It is not a desktop plug-in UPS.
Does it support server rack installation?
Yes. It is a rack/tower convertible UPS with a 4U chassis. Rack installation must account for the 55.9kg weight, rail kit requirement, cable bend radius, battery service access, and rack balance. We normally place this class of UPS low in the rack.
Can runtime be extended with external battery packs?
Yes. The SRTG6KXLI supports SRTG192XLBP4 external battery packs. Runtime depends on the connected load in watts and the number of battery packs. Share the equipment list and required backup time so we can size the battery configuration correctly.
Does the UPS include network monitoring?
Yes. The SRTG6KXLI includes Network Management Card 3 with environmental monitoring. That allows remote UPS monitoring, event alerts, battery status checks, and shutdown coordination for protected servers and network devices.
What battery does the SRTG6KXLI use for replacement?
The replacement battery cartridge is APCRBC170. Battery life is affected by temperature, load, charging cycles, and room conditions. In UAE server rooms, battery health checks should be part of AMC planning.
Is the APC SRTG6KXLI available for installation in Abu Dhabi and Sharjah?
Yes. Vector Digital Systems supports UPS supply and installation across all 7 UAE emirates, including Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. Site readiness and electrical scope are confirmed before scheduling.
Comparable APC UPS options
Lower load racks: If the protected load is below this class, a smaller APC Smart-UPS On-Line model may be enough. Good for a firewall, one switch, small NAS, and light network room use.
Same 6kVA requirement with longer runtime: Use SRTG6KXLI with external SRTG192XLBP4 battery packs. This keeps the same UPS platform and extends backup time for shutdown or generator bridge requirements.
Higher rack load: If the measured load is near 6kW today, move up instead of buying with no headroom. UPS sizing should leave room for future servers, storage, and network hardware.
Full server refresh: If the UPS is being purchased with new servers, plan the rack as one system: server, storage, firewall, switch, PDU, UPS, cooling, and monitoring. See our Dell PowerEdge server Dubai page for rack server options that are commonly protected by this UPS class.
Africa, GCC, and MEA export
Vector Digital Systems exports APC UPS systems from Dubai for projects across Africa, GCC, and South Asia. Common export requirements include server room UPS units for offices, banks, schools, clinics, logistics companies, and telecom rooms.
FOB Dubai pricing is available for resellers and project buyers. We can quote UPS units, external battery packs, replacement batteries, rack accessories, and related IT infrastructure together. Export buyers should share destination country, quantity, required runtime, input power type, and whether the UPS is part of a wider server or network project.
For Kenya, Tanzania, Uganda, Nigeria, Qatar, Oman, Saudi Arabia, and South Asia, Dubai remains a practical procurement hub for APC UPS, Dell PowerEdge servers, firewalls, switches, and rack accessories. Documentation and packing requirements can be discussed during quotation.
About Vector Digital Systems
Vector Digital Systems is an authorised Dell Technologies partner in Dubai, UAE, supplying servers, UPS systems, racks, storage, networking, security, and IT infrastructure with installation and rack deployment across all 7 UAE emirates — Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. Founded in 2009. Office: International City, France Cluster R15, Office 16, Dubai, UAE. Contact: +971 4 450 4145 · Monday–Saturday 8AM–6PM.
Get a quote for APC SRTG6KXLI
6kVA / 6kW online UPS · Dubai supply · Installation · Battery packs · AMC support

